THREAD LOCKER
INSTAbond 124 is a low strength threadlocking compound designed for fastener diameters of ¼” (6 mm) and smaller. Has moderate chemical resistance and quick fixture time. Parts can be separated using hand tools. INSTAbond 124 complies with MIL-S-46163 Type II Grade N / ASTM D 5363-03 AN0321.
| Category | Adhesive | Brand | Accra Bond Corp |
| Part No. | INSTABOND 124 | OEM Part No. | Not Avaliable |
| Alt Part No. | Not Available | Country of Origin | Not Available |
| Pro Category | Not Available | Is Return | Yes |
GENERAL INFORMATION
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be used with a sealant for chlorine-containing constituents or other strong oxidizing materials. This product is not suitable for use on plastic parts. Refer to Material Safety Data Sheet for instructions on safe handling of this material.
STORAGE
This product should be stored less than 100 deg F and out of direct sunlight. Product should be stored in the original, closed container. NEVER combine liquid primers/activators with anaerobic sealing compounds as violent chemical reactions will result. Shelf life is 18 months when stored in accordance with manufacturer’s recommendations.
DIRECTIONS FOR USE
Substrates should be cleaned and degreased with a solvent such as acetone, MEK, or trichloroethylene. Do use mineral spirits or Stoddard solvent. Allow substrates to dry completely before applying sealing compound. Apply sealing compound to both surfaces and assemble. For faster cure speed and maximum bonding, apply INSTAbond Primer N, INSTAbond Primer T or INSTAbond Primer F prior to application of sealing compound. Allow primer to dry thoroughly before applying sealing compound. Once fixturing has occurred, no adjustments should be made as this will decrease the sealing compound’s total locking strength once the fixture bond is broken.
INSTABOND 124